UbiqVue™ Holter App

UbiqVue™ Holter App

•
•
•

Internal Release: 5.1.11

Registration, billing, and validation improvements

  • Country selection is now clearer for regions sharing the +1 dialing code.
  • Phone number entry and validation have been updated for improved accuracy.
  • New procedure registration now provides clearer handling when an existing Patient ID is entered.
  • Added Billing Indication (ICD-10) and Relationship to Subscriber fields to the Billing Info page.
  • Added support for new error codes in Patient Update and Register workflows

Clinician and workflow improvements

  • Default users now populate correctly when the selected location is at the facility level.
  • Prescribing Physician details are now displayed on the Procedure Details page.
  • Logout from the Procedure Details page now works as expected.
  • Clinician login now shows the appropriate message when users are reassigned during an active procedure.

Notification and usability improvement

  • End-of-procedure banner notifications have been refined for improved clarity.
  • First-time tour guidance now points correctly to key app status areas.
  • Data retrieval now shows the appropriate tips when internet or Biosensor connectivity is interrupted.
  • Height and weight values now update immediately when unit preferences are changed.

Bug fixes

  • Fixed an issue where symptoms from a previous user session could appear for a newly logged-in user on the same device.
  • Resolved app crashes that could occur after extended idle time or while connecting multiple Biosensors.
  • Corrected duplicate no-internet messages and authentication code messaging after resending.
  • Corrected detached-electrode messaging so it appears only in the appropriate workflow state.
  • Fixed Biosensor ID update behavior when connecting an unassigned Biosensor to a registered patient.
  • Fixed notifications that could remain after logout or procedure completion.

Internal Release: 5.1.10

  • Bug fixes

Internal Release: 5.1.9

  • The clinician login screen is enhanced with:
  • A country code picker for phone number-based login.
  • Helper text included to guide users during sign-in.
  • Procedure duration based on regulatory clearance across regional servers.
  • Improved device pairing experience for the user with improved BLE passcode visibility.
  • “Cancel” button added to “Enter Monitoring Time” screen to enable the user to proceed without initiating the data retrieval.
  • Bug fixes and minor UI enhancements.

Internal Release: 5.1.8

Clinician patient management support

  • Clinicians can now log in to the UbiqVue Holter App and manage procedures, including registration, editing, stopping, and data retrieval.
  • Retrieval progress is now displayed during in-app retrieval.

Internal Release: 5.1.7

Enhanced App Tour experience

  • Updated App Tour screens to improve patient onboarding and in-app orientation (clearer guidance and UI flow).

More accurate remaining-time display

  • Remaining time is now calculated using the procedure duration provided by the server for improved accuracy and consistency.

Refined notification behavior

  • Removed behavior that could bring the app to the foreground in response to silent notifications.
  • Alert notifications for internet disconnection and Biosensor lead-off.

System information captured with data uploads

  • Added app/device context (OS type, OS version, app version, procedure type) to data messages to improve troubleshooting, compatibility tracking, and support.

Bug fixes

  • General stability and performance improvements.

Internal Release: 5.1.6

Bug Fixes

  • Fixed recovery issue after extended App–Biosensor disconnection.
  • Addressed issue where auto-configured biosensors required reconfiguration.

Internal Release: 5.1.5

Compatibility

  • App now required Android 13 or higher for installation

Internal Release: 5.1.3 – 5.1.4

Improved Symptom Capture & Monitoring

  • The symptom recording button has been removed from the app.
  • A new Symptoms Summary view has been added to review events.
  • During periodic disconnection, the app now reconnects to the Biosensor if a button press is detected.
  • If a button press occurs, the app will open the Record Symptoms page or show a notification if the phone is locked.
  • Event timing is now calculated accurately once the related ECG data is retrieved—ensuring precise reporting.

Notifications & User Reminders

  • The app now sends local notifications, including reminders to press the Biosensor for better adhesion, and notifications for procedure end and persistent error conditions. Users are prompted to allow notification permissions when needed.

User Interface Enhancements

  • A completely new user interface and workflow have been implemented, including updated visual design and splash screen.
  • The Paper Diary workflow and procedure detail dialogs have been removed to streamline the experience.
  • Button presses from the Biosensor related to internal events are now ignored to prevent false entries.

Connectivity & Data Transfer Improvements

  • Enhanced support for Wi-Fi-only mode, including compatibility with Ethernet connections on receiving devices.
  • The app now provides clearer Bluetooth setup guidance based on the phone’s connection status.
  • Improved compatibility with updated firmware and enhanced reliability of data transfers to the cloud.
  • A new force termination flow ensures procedures are properly closed even if a Biosensor fails to connect.

Feedback & Support Resources

  • At the end of the procedure, users are shown a feedback screen to share their experience. The app now links to release notes and FAQs/travel info via embedded URLs.

App Compatibility & Security Enhancements

  • Security fixes and dependency updates have been applied. The app is now built with Target API Level 34 (Android 14) for enhanced compatibility. Background logs are securely uploaded for diagnostic support

Initial Release

UbiqVue™ Holter App

UbiqVue™ Holter App

•
•
•

Internal Release: 1.3.9

Registration, billing and validation improvement

  • Improved validation during patient registration, including clearer handling when an existing Patient ID is entered.
  • Added phone number validation to patient login.
  • Added a “Select” option to clear CPT, ICD, and Billing Info code selections.
  • Added Billing Indication (ICD-10) and Relationship to Subscriber fields to the Billing Info page.
  • Added support for new error codes in Patient Update and Register workflows.
  • Biosensor type comparison is now case-insensitive.

Notification and usability improvements

  • Updated end-of-procedure banner notifications for improved clarity.

Bug fixes

  • Improved default user population when facility-level users are selected.
  • Added validation messaging when BLE permission is denied during Biosensor connection in clinician workflow.
  • Resolved issues that could cause the app to remain stuck while fetching Biosensor details or after authentication failure during cross-device symptom editing.

Internal Release: 1.3.8

  • Bug fixes

Internal Release: 1.3.7

  • Allow clinician login using phone number.
  • Procedure duration based on regulatory clearance across regional server.
  • Improved device pairing experience for User with improved BLE passcode visibility.
  • “Cancel” button added to “Enter Monitoring Time” screen, to enable the User to proceed without initiating the data retrieval.
  • Bug fixes and minor UI enhancements.

Internal Release: 1.3.6

Clinician patient management support

  • Clinicians can now log in to the UbiqVue Holter App and manage procedures, including registration, editing, stopping, and data retrieval.
  • Retrieval progress is now displayed during in-app retrieval.

Internal Release: 1.3.5

Enhanced App Tour experience

  • Updated App Tour screens to improve patient onboarding and in-app orientation (clearer guidance and UI flow).

System information captured with data uploads

  • Added app/device context (OS type, OS version, app version, procedure type) to data messages to improve troubleshooting, compatibility tracking, and support.

Internal Release: 1.3.4

Bug Fixes

  • Addressed issue where auto-configured biosensors required reconfiguration.

Security Enhancements

Internal Release: 1.3.3

Compatibility

  • App now requires iOS 18 or higher for installation.

Internal Release: 1.2.9-1.3.2

Simplified Symptom Reporting

  • New Symptoms Summary screen to easily review logged symptoms.
  • Option to edit symptom entries, including those marked as “Don’t Remember.”
  • New “Don’t Remember” selection when logging symptoms.
  • When a symptom is detected, an intermediate popup now allows quick selection of “Don’t Remember” or “Pressed by Mistake.”
  • Biosensor button press is now the method for recording symptoms during Holter monitoring (app-based button removed).
  • If the Biosensor reconnects after temporary disconnection, the app prompts for symptom entry if a button press occurred.

Enhanced Tips & Onboarding

  • Updated tip visuals and descriptions for clearer guidance.
  • Tips are now expandable/collapsible for easier navigation.
  • Walkthrough section refreshed with new screens and text for improved clarity.

Improved Notifications & Connectivity

  • Local notifications added to guide users through key steps and scenarios.
  • The app will now automatically reconnect and run in the background if closed by the OS or the phone is restarted.

Streamlined Navigation & Procedure Support

  • Menu updated with clearer titles and cleaner layout; outdated items removed.
  • Logout button added at the end of the monitoring procedure.
  • New option to replace Biosensor for multi-patch procedures.

Feedback & Personalization

  • Enhanced feedback form now includes multiple question types (e.g., multiple choice, optional text).
  • Optional setting to enter Patient ID on login (disabled by default).

Internal Release: 1.2.7-1.2.8

Regional & Configuration Updates

  • The app now automatically selects the country code based on the patient’s phone regional settings.
  • The Patient Support telephone number shown in the UbiqVue App is now customizable via a Clinical Facility Admin setting.
  • Facility names now display correctly when connecting to available services.

Usability Enhancements

  • Activity levels have been relabeled as Low, Moderate, and High for better clarity.
  • UI alignment issues in the summary view have been resolved.
  • Biosensor profiles now appear reliably after restarting the app.

Stability & Connectivity Fixes

  • The app now sets the data retrieval mode dynamically based on system configuration.
  • Fixed a generic “Check Internet Connection” message—alerts are now more specific and informative.
  • Improved behavior so that Biosensor disconnection only occurs after reconnection is confirmed, reducing potential interruptions.
  • Resolved a background connectivity issue that could cause repeated reconnection attempts.

Internal Release: 1.2.6

Improved Patient Monitoring Workflow

  • Enhanced support for auto-started Holter patches with clearer prompts for start time entry.
  • “Ask Me Later” option added when prompted for start time—provides flexibility without losing critical data.
  • New stop procedure workflow improves consistency and usability.
  • Support for Biosensor removal and replacement is now guided with in-app tips.
  • Button presses related to internal device events are now ignored, reducing false symptom entries.

UI & Navigation Enhancements

  • New Profile, Configuration, and Patient Support pages added.
  • Landing page, walkthrough, login, OTP, and onboarding screens redesigned to align with updated app visuals.
  • Layout now optimized for smaller screen devices.
  • Multiple instructional tips can now be displayed at the same time.
  • Minor improvements to alignment, labels, and text fields for a smoother interface.

Connectivity & Data Handling Improvements

  • App now supports Wi-Fi only or Wi-Fi + mobile data configurations.
  • Improved background refresh ensures reliable reconnection after suspension.
  • Enhanced data retrieval logic to dynamically switch between periodic and continuous modes.
  • Fixed issues related to auto-logout, incomplete reconnections, and missing alerts during low or no connectivity.
  • Biosensor disconnection is now delayed until reconnection is fully confirmed, preventing premature disconnection.

Security & App Optimization

  • Old session data is now cleared upon login for a cleaner and more secure experience.
  • Encryption and session log structures have been updated for better protection of patient data.
  • Backend logic enhanced to support cloud-based relay management and load balancing, improving system reliability.

Initial Release